Midland BT Ski User Manual download pdf (Page 11)

UK

11

Wired connection always on

This feature let you keep the wired connection

always on, even when the phone or the intercom

is open. This feature can be useful when you

connect a PMR446 transceiver.

Enabling:

Enter the “Setup” mode. ›

Press the “Volume+” and “Volume -” but- ›

tons for one second. The blue LED will ash

once.

To exit the “Setup” mode double press the ›

“Control” button.

Disabling:

Follow the same procedure up described; ›

now the blue LED will ash twice

To exit the “Setup” mode double press the ›

“Control” button.

Recommendations for specic

uses

The section that follows, provides a few useful

suggestions on how to achieve maximum

performance from your BTSKI unit.

Using a PMR446 transceiver with the Inter-

com feature

If you wish to use a PMR446 transceiver for

group communications and simultaneously

maintain the Intercom feature enabled between

two BTSKI devices, you must remember that

the Intercom feature is enabled every time you

speak by means of the BTSKI’s VOX feature.

Consequently, radio communications will be

disabled whilst you are talking with somebody,

because they have a lower priority compared to

Intercom communications.

This can be prevented by enabling the “Wired

connection always on” or disabling the VOX

feature.

Disable the VOX feature, as explained in the

previous section, to make sure that the intercom

will not automatically be activated when you

speak on the PMR446. To enable the Intercom

feature when using this conguration, you will

have to press “Control” button manually. (This

operation disables radio communications that

will be automatically re-enabled when the

Intercom feature is disabled).

Attention! If you disable the VOX feature, you

will only be able to answer incoming phone

calls by pressing the “Control” button.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments