Midland BT Next Conference Specifications download pdf (Page 24)

Midland BT Next - 23

pairing). Every time you open the intercom connection to one person, the previous

connection will be closed.

The connection is not a “chain”, when two persons are talking it is not possible to

break (interrupt) the communication by one of the other two units riding out of the

maximum distance range.

Pair the BT Next Conference to another BT Next Conference unit

To pair the BT Next C. to another BT Next C. unit, you must rst enter the setup mode:

1. Turn o the unit

2. Press and hold down the middle button about 7 sec., until the Red light is on per-

manently.

3. Now press one of the three buttons (Forward, Middle or Rear) for 3 seconds depen-

ding on which button you would like use to open the intercom to the other unit.

The Blue and Red lights will ash.

4. Repeat the same procedure on the other unit, you don’t need to use the same but-

ton, you can choose one of the three buttons not previously used.

5. When successfully paired, each unit will have the Blue light on for one second and

then go back to the setup mode (Red light always on). Now the unit is ready for

another pairing procedure, and you can pair another BT Next C. unit following the

same procedure, but using a dierent button.

If you don’t have more devices to pair, you must exit the setup mode before you can

use the units:

› Double click on the Middle button, the Red light will turn o and the Blue light

will start ashing.

You can use now your BT Next C..

How to use the Intercom with more than two units

To use the intercom feature, be sure that all the units are turned on and correctly paired

together

Attention: For intercom communication between Driver and Passenger there is no need

to keep the ip-up antenna in the up position. For Bike to Bike intercom the antenna must

be in the upper position.

Manual activation

Press the button corresponding to the unit you would like to communicate with. After

about 4 seconds the intercom communication will open.

The communication remains active until you press again the same button. To quickly

open the intercom to another person, just press the button corresponding to the other

unit, the intercom will be automatically closed and the new connection will be open

(see Table A).

Voice activation (VOX)

The voice activation feature can open the intercom only to the unit paired to the Middle

button. While no other communication is open, simply start talking and the commu-

nication will be open and remain active for all the time you are talking. If there is no

conversation the intercom will be closed after 40 seconds. If needed you can close the

intercom manually without waiting 40 seconds, pressing the Middle button.

If needed, you can disable the VOX feature simply by pressing the Backward button for

7 sec. A voice announcement will advise you when the VOX is disabled. To turn the VOX

on again, just press the same button and a voice announcement will advise you that the

VOX is now active. This setting is remembered also in you turn o the unit.

Hint: this feature is very useful when you have a speciﬁc person that you like to

talk to more often (for example your passenger). In this way you don’t need to

press a button to open the communication.

Unit already busy

If you try to open a intercom connection to another person that is already talking with

some one else (or is in a middle of a phone conversation), you will hear a “busy” double

beep tone. Just wait sometime and try again, maybe this time the “line” is not busy.

The person who is called, will be advised that someone is trying to call and will hear a

voice announcement with the number of the button from which the request is coming.

In this way as soon as the rst conversation is over, the person can easily contact the

caller by opening the intercom of the specic button number (indicated by the voice

announcement).

A- Manual activation

Mode Forward button Middle button Rear button

Intercom Short press: Open/Close intercom to paired

raider

Short press: Open/Close intercom to paired

raider

Long press: Change mode

Short press: Open/Close intercom to paired

raider

Long press: Toggle on/o wired

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 117 118

Comments to this Manuals

No comments

Midland BT Next Conference Specifications Page 24

Comments to this Manuals

Related products and manuals for Motorcycle intercoms Midland BT Next Conference