Midland BTX1 User Manual download pdf (Page 16)

Midland BTX1 - 15

Normally, after the ﬁrst time, it takes 6 hours for a full charge.

Attention: every time the mini USB recharging plug is inserted (or detached), the

device is automatically turned oﬀ. To use it while it is in charge, you should turn the

device on with the plug already inserted.

Unit and ﬁxing system description

BTX1 description

The BTX1 has ﬁve buttons on the front; the main three big button are multi fun-

ctions buttons: the Forward (on the left), the middle button and the Rear (on the

right), the two small rounded buttons are the Volume + and Volume -.

Description of the wired connections

On the bottom of the unit you can ﬁnd three wired connection:

Charger jack: enables to recharge the unit using a standard miniUSB power

supply

Audio kit jack: enable to connect an audio kit (stereo headset and microphone)

Auxiliary audio jack (AUX) 2.5mm: can be used to connect an audio source, like

a stereo iPod/MP3 player or PMR446 transceiver

Description of the audio kit

The audio system includes two ultra-ﬂat

stereo speakers and two interchangeable

microphones, which are both supplied with

a bracket and wired connection.

Fixing the stereo speakers

The two stereo speakers have a Velcro/adhesive strip that aids their ﬁxing into

your helmet.

Beware not to completely cover your ear with the speakers, you must always be

able to listen to the traﬃc sound and your indicators.

The microphone can be ﬁxed onto the helmet in two ways:

Boom Microphone

Place the section with the Velcro/adhesive strip between the padding and the

rigid cover of the helmet, so that the microphone is correctly positioned in front of

your mouth and that the white symbol is facing your mouth. This type of micro-

phone is suited for Open Faced and Flip Front helmets.

Wired microphone

Using the Velcro/adhesive strip, place the microphone inside the helmet in front

of your mouth. This type of microphone is more suited for Full Faced helmets. The

mini connector on the microphone allows you choose the microphone that best

suits the helmet you are using.

Audio kit jack

The audio kit must then be connected to the central jack of the Midland BTX1 unit

using the “L” shaped connector.

Middle button

Volume -Volume +

Forward button Backward button

Charger jack

Audio kit jack

Auxiliary audio jack (AUX)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 110 111

Comments to this Manuals

No comments

Midland BTX1 User Manual Page 16

Comments to this Manuals

Related products and manuals for Communication Midland BTX1