Midland GXT2050 Series Troubleshooting Guide download pdf (Page 10)

Model GXT2000/2050 Series

Page 10 www.midlandusa.com

SETTING PRIVACY CODES

Your GXT2000/2050 Series has 142 Privacy Codes available

which can only be used on channels 1~22. The selected Privacy

Code may be different for each channel. To select a Privacy Code

for the current channel press the MENU button twice, and then

press the

buttons to select between “Off/CTCSS/DCS.” Press

the MENU button again and the

buttons to select one of the 38

CTCSS Codes or one of the 104 DCS Codes.

The Privacy Code icon on the display will indicate whether you set

your Privacy Code in CTCSS or DCS mode. To confirm the selec-

tion, press the PTT button or press the MENU button again to move

to the next feature setting.

Note : If you select a CTCSS Privacy Code, any pre-selected

DCS Privacy Code will be cancelled and vice-versa.

Selecting a Privacy Code of “oF” will disable the Privacy

feature. To communicate between two GXT2000/2050

Series radios, all radios in your group must be set to the

same channel and Privacy Code selections. The Privacy

Code can only be set in channels 1~22.

TRANSMIT (TX) POWER LEVEL SELECTION

Your GXT2000/2050 Series has 3 power level settings. To select

the power level on channels 1~7, 15~33 and 38~50, press the

MENU button until a “Pr” icon appears blinking on the display. Then

press the

buttons to select TRANSMIT POWER LEVEL icon

(H:Hi / M:Med / L:Lo). To confirm, press the PTT button or press

the MENU button again to move to the next feature setting. When

the Battery Meter drops to 1 bar

, the TX Power will auto-

matically switch from Hi(H) or Med(M) to Lo(L) level.

Note : You cannot adjust the power setting on the FRS

channels (8~14 and 34~37). They are set to Low power per

FCC regulations.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

No comments

Midland GXT2050 Series Troubleshooting Guide Page 10