Midland BT1 User Manual download pdf (Page 4)

Charging batteries

Make sure that the unit is fully charged before use. Allow at

least 5-6 hours for a full charge before using the unit for the

ﬁrst time. Normally, after the ﬁrst time, it takes 4 hours for a

full charge.

Charge the unit by inserting the wall-charger into the charging

socket (lift the rubber cover to insert the plug).

› The red LED on the unit will start ﬂashing when charging

begins.

› Allow the headset to charge until the red LED turns off.

› When the charge is complete, release the headset from

the charger.

Description of the unit

and installation brackets

Description of the BT1 unit

The BT1 has 5 multifunction buttons on the front and 3 wired

connections in the lower section.

Description of the button features:

› Telephone (for driver’s unit only): can be used to enable/di

sable and manage mobile phone features

› Intercom: can be used to enable/disable the Intercom fea

ture

› AUX: can be used to enable/disable the wired audio input

› Volume+: enables you to increase the volume

› Volume -: enables you to decrease the volume

Description of the wired connections

› Charger jack: enables to recharge the unit using a stan

dard mini USB power supply

› Audio kit jack: enable to connect an audio kit (stereo head

set and microphone)

› Auxiliary audio jack (AUX): can be used to connect an au

dio source, like a stereo iPod/MP3 player or GMRS tran

sceiver

Description of the audio kit

The audio system includes two ultra-ﬂat stereo speakers and

two interchangeable microphones, which are both supplied

with a bracket and wire connection.

Fixing the stereo speakers. The two stereo speakers have

a Velcro/adhesive strip that aids their ﬁxing to your helmet.

Beware to not completely cover your ear with the speakers,

you must always be able to listen to the trafﬁc sound and

indication.

The microphone can be ﬁxed onto the helmet in two ways:

Boom Microphone. Place the section with the Velcro/adhe

sive strip between the padding and the rigid cover of the hel

met, so that the microphone is correctly positioned in front of

your mouth and that the white symbol is facing your mouth.

This type of microphone is suited for Open Faced and Flip

Front helmets.

Wire microphone. Using the Velcro/adhesive strip, place

the microphone inside the helmet in front of your mouth. This

type of microphone is more suited for Full Faced helmets.

The mini connector on the microphone allows you choose the

Charger

Audio kit

iPod/MP3

GMRS

Phone

(for driver’s

unit only

Intercom

AUX

Volume +

Volume -

Red and

blue light

1 2 3 4 5 6 7 8 9 ... 20 21

Comments to this Manuals

No comments

Midland BT1 User Manual Page 4

Comments to this Manuals

Related products and manuals for Communication Midland BT1