Midland WR-100 Owner's Manual download pdf (Page 8)

WR-100 Owner’s Manual

Page 8 www.midlandradio.com

3. Go to the Midland Radio Corporation website at www.midlandradio.com

• Click on the weather radio link at the top of the page.

• At the top of the weather radio page will be the link to the NWS list of

states and corresponding county codes. Click on the link.

• Click on your state and a list of counties and codes will be listed. Locate

your county and then find your code.

Programming S.A.M.E. Codes into the WR-100:

“ANY” S.A.M.E. County Codes is the Default Factory Setting: Your WR-

100 weather radio comes preprogrammed to receive NWS weather and haz-

ard alert transmissions for all S.A.M.E. county codes within range. If this is

what you want, leave the radio set to “ANY.”

A Single S.A.M.E. County Code:

Press “MENU” button to open menu options.

• Press the “UP” arrow to scroll through menu options until “S.A.M.E.

SET” is displayed, then press “SELECT” button.

• Press the “UP” arrow to scroll through: “SINGLE”, “MULTIPLE”, or

“ANY.”

• Display “SINGLE”, then press “SELECT.” “S.A.M.E.01” will be displayed.

(Note if you are programming a single S.A.M.E. County Code, only the

“01” setting will be used.)

Press “SELECT”.

• Using the “UP” arrow, find the first digit of your S.A.M.E. County Code.

Press the “RIGHT” arrow to save the digit and automatically

advance to the next digit.

• Program all digits of your S.A.M.E. County Code in the same way.

• Press “SELECT” to store your S.A.M.E. County Code. Press “MENU”

to close the programming menu.

Helpful Tip: The S.A.M.E. code is created using the following method:

• The first digit is the subcounty code-currently 0 in most areas.

• The second two digits represent the state code.

• The last three digits represent the county code.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Midland WR-100 Owner's Manual Page 8